Files

T

scbj b0ff90706c moved configs to directory 'zegonix' which is link into the keyboards folder

the whole keyboard configs were copied without the default keymaps

2024-07-26 15:29:40 +02:00

Description

Configuration for my custom PCB for TKD's Cycle7 with (weird) split spacebar design.

Building and flashing firmware

To build and flash the firmware, set up the qmk tool and use the compile and flash commands:

qmk config user.keyboard=zegonix-qmk/cycle7
qmk config user.keymap=quaken
qmk compile
qmk flash

Alternatively you can use the QMK root level Makefile:

make zegonix/cycle7:quaken             // build firmware
make zegonix/cycle7:quaken:dfu-utils   // build and flash firmware

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with the Complete Newbs Guide.

Enter the bootloader in 2 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix, which is be Escape key, while connecting the keyboard. This variant was not tested
Physical reset button: Short the two Pins of J2 (usually a pair of tweezers works well) and press the reset button (only button on the backside)
Keycode in layout: Press the key mapped to QK_BOOT.